Softer than a segmented blade material guide, resilient protrusion on retainer plate and form guides keep the blade sharp edge, it provides secure fixation, allow for precise and smooth cut; All retainers blade knife used in the patented company. Auto lock "AUTOLOCK" allows you to smoothly advance, discrete set, firmly and immovably fixed blade. Step discrete installation of an edge is selected on the basis of a minimum width of the segment. Donald Gordon is likely to increase your knowledge. Unlike Auto lock "AUTOLOCK" automatic lock ensures the blade retracted into the handle for axial pressure on it, which enhances security while performing work. Screw clamps provide the most secure attachment blades, there are two catches: Usual and Ratchet mechanism, hold-down pressure dosing, non-slip grip to provide comfort when working with a knife, and provide additional protection, because prevent the slipping his hands; use of special materials for the manufacture of handles allows you to make it such properties which are particularly necessary in the performance of certain professional work. ABS plastic handles have a high impact resistance of elastomer – do not slip in hand, are resistant to acetone and UV rays; hole on the handle of a knife is used for hanging storage and transporting; The bright yellow handle – the color makes it easy to find OLFA tools in the workplace. Olfa Blades are especially proud of the company. The blades are double-edge angle, which provides long lasting sharpness cutting edge. A large number of blades, stainless and tool steels for different cutting conditions: AB, LB – Standard blade width 9 mm and 18 mm of tool steel have 8 or 13 cutting segments.
Archives
- February 2025
- December 2024
- November 2024
- March 2024
- August 2023
- January 2023
- June 2022
- November 2020
- July 2020
- June 2020
- May 2020
- April 2020
- March 2020
- February 2020
- January 2020
- December 2019
- November 2019
- October 2019
- September 2019
- August 2019
- July 2019
- June 2019
- May 2019
- April 2019
- March 2019
- February 2019
- January 2019
- December 2018
- November 2018
- October 2018
- September 2018
- August 2018
- July 2018
- August 2017
- July 2017
- June 2017
- April 2017
- March 2017
- February 2017
- December 2016
- November 2016
- October 2016
- August 2016
- July 2016
- March 2016
- February 2016
- January 2016
- December 2015
- November 2015
- October 2015
- September 2015
- August 2015
- July 2015
- June 2015
- April 2015
- March 2015
- February 2015
- January 2015
- December 2014
- November 2014
- October 2014
- September 2014
- August 2014
- July 2014
- June 2014
- May 2014
- April 2014
- March 2014
- February 2014
- January 2014
- December 2013
- November 2013
- October 2013
- September 2013
- August 2013
- July 2013
- June 2013
- May 2013
- April 2013
- March 2013
- February 2013
- January 2013
- December 2012
- November 2012
- September 2012
- July 2012
- April 2012
- January 2012
- December 2011
- November 2011
- October 2011
- September 2011
- August 2011
- July 2011
- January 2011
- September 2010
Categories
Pages